$249.95 USD

Description of Product HEXCA12

Helix™ Mustang II Tubular Lower Control Arms are the Grade “A” LCA that your hot rod needs for maximum performance! These control arms are a fully assembled ready-to-install left and right set that are a direct replacement for stock Mustang II LCA’s with standard springs. Will fit on any Mustang II IFS and most stock or aftermarket Mustang II crossmembers without modification.



The Helix™ lower control arm assembly features precision fabricated TIG welded construction and 1 inch O.D. aircraft quality tubular steel design with full .120 wall for maximum strength and durability. This makes for a lighter weight yet much stronger LCA than the original stock arm that will endure a far higher stress load than the OEM design.



Complete left and right assembly includes 2 ea. 5/8-11 x 12” hex bolts (cross shaft), nylon locking nuts and large 5/8” washers, screw-in ball joint with urethane dust boot & grease fitting, 7/16-14 x 7” hex bolt (Allen head), castle nut w/ cotter pin, and castle nut/ball joint spacers (2 ea. x 2). This lower control arm assembly is stock design and ready to drop in immediately out of the box. For all of your suspension needs, Helix™ deliver the winning edge for maximum performance when it really counts!



Stay ahead of the pack with Helix Suspension. For more information on Helix products please contact your local dealer, or go to http://www.helixsuspension.com.

Features

• Fully Assembled :: Yes
• Application :: Mustang II IFS
• Type :: Tubular
• Tube Finish :: Plain Painted Surface
• Cross Shaft Finish :: Plain Steel
• Feature :: All Steel Construction
• TIG Welded :: Yes
• Screw In Ball Joint :: Yes
• Grease Fitting Included :: Yes
• Urethane Dust Boot :: Yes
• Fully Assembled :: Yes
• Adjustable :: No
• Tube O.D. :: 1 in. (25 mm)
• Feature :: Full .120 Wall Tubing
• Center to Center Length :: 13” (33.0 cm)
• Feature :: (Ball Joint Shaft Center to Cross Shaft Eye Center)
• Overall Width :: 10.5” (26.7 cm)
• Overall Length :: 14.75” (37.46 cm)
• Cross Shaft O.D. :: 5/8” (16 mm)
• Quantity :: Pair
• Left Side LCA :: 1
• Right Side LCA :: 1
• Hardware Included :: Yes
• Castle Nut :: 2
• Cotter Pin :: 2
• Ball Joint/Nut Spacer Washers :: 2x2
• Bushing/Sleeves :: 4
• 7/16-14 x 7” Hex Bolt (Allen Head) :: 2
• 5/8-11 x 12” Hex Bolt :: 2
• 5/8-11 Nylon Lock Nut :: 2
• 5/8 Large Flat Plain Washer :: 4